Crest Audio CA20 Power Amplifier
KSh 97,800 Original price was: KSh 97,800.KSh 90,500Current price is: KSh 90,500.
The Crest Audio CA20 Power Amplifier is a 2-channel Class H power amplifier delivering 2,000 W per channel into 4 Ω and 5,000 W bridged at 4 Ω. Built on Crest’s TourClass® protection, the CA20 keeps full power flowing into 2-ohm subwoofer loads night after night.
- Power: 1,000 W at 8 Ω · 2,000 W at 4 Ω · 2,500 W at 2 Ω · 5,000 W bridged at 4 Ω
- Connections: XLR and ¼" TRS in; Speakon and binding posts out
- Protection: TourClass®: ACL clip limiting, IGM, AutoRamp, short circuit, DC, turn-on/off transient
- Best for: Concerts, large churches and touring rigs that drive big subwoofers
Sold by: Ablaze Sounds
Crest Audio CA20 Power Amplifier overview
The Crest Audio CA20 Power Amplifier is a 3U rackmount, 2-channel Class H amplifier from the Crest Audio CA Series. Built on Crest’s TourClass® protection, the CA20 keeps full power flowing into 2-ohm subwoofer loads night after night. It is a strong choice for concerts, large churches and touring rigs that drive big subwoofers.
Operating modes: stereo, parallel, bridged mono. Built-in features: rear mode switch, ground lift. Cooling: two variable-speed fans, back-to-front airflow.
Crest Audio CA20 Power Amplifier specifications
| General | |
|---|---|
| Brand | Crest Audio |
| Model | CA20 |
| Series | CA Series |
| Channels | 2 |
| Amplifier class | Class H |
| Rack size | 3U |
| Power output (RMS) | |
| Per channel at 8 Ω | 1,000 W |
| Per channel at 4 Ω | 2,000 W |
| Per channel at 2 Ω | 2,500 W |
| Bridged mono at 8 Ω | 4,000 W |
| Bridged mono at 4 Ω | 5,000 W |
| Audio performance | |
| Frequency response | 20 Hz – 20 kHz (+0 / −0.3 dB) |
| Distortion (THD / IMD) | < 0.03% (rated power, 4 Ω, 1 kHz) |
| Signal-to-noise ratio | > 110 dB (A-weighted) |
| Damping factor | 800:1 (10–400 Hz, 8 Ω) |
| Input sensitivity | 1.23 V |
| Voltage gain | 40× (32 dB) |
| Input impedance | 20 kΩ balanced / 10 kΩ unbalanced |
| Connections and controls | |
| Inputs | XLR and ¼" TRS |
| Outputs | Speakon and binding posts |
| Operating modes | Stereo, parallel, bridged mono |
| Processing and controls | Rear mode switch, ground lift |
| Indicators | Active, Signal, Clip/Limit, Protect (per channel) |
| Protection and cooling | |
| Protection | TourClass®: ACL clip limiting, IGM, AutoRamp, short circuit, DC, turn-on/off transient |
| Cooling | Two variable-speed fans, back-to-front airflow |
| Power and size | |
| Power supply | Factory set: 100 V, 120 V or 230 V |
| Dimensions (H × W × D) | 133 × 483 × 400 mm (3U) |
| Net weight | 34.9 kg |
| Brand | Crest Audio |
|---|---|
| Channels | 2 Channels |
| Power per Channel (4 Ω) | 500 W, Over 1 |
| Amplifier Class | Class H |
| Rack Size | 3U |
















































































































































Reviews
Clear filtersThere are no reviews yet.